Price | 1 |
---|---|
Discounted Price | $1.00 ($1.00 discount) |
Discounted Amount | Total Discounted Amount KRW (Mobile Purchase Discount KRW ) |
Reward Points |
$0(0%) KRW % KRW % KRW % KRW % KRW % KRW % KRW % KRW % KRW % |
Shipping Method | Parcel Service |
Shipping Cost | International Shipping Fee |
Shipping | |
---|---|
Quantity |
Product Info | Product | Remove |
---|---|---|
Total(Qty) 0 |
WB-Series Turbo Compressor
SEAH INDUSRTRY
. Featuring single casting body integrated with gear case, inter & after cooler,
and air piping system, it also provides ;
- Noise minimized and simple compact design
. Featuring 100% oil free and contamination free operation, it also provides ;
- Complete structural separation between lubricating and air compressing parts
. Maximum efficiency and quality safety are achieved by ;
- High efficiency design based on state-of the-art computer simulation methods
- Adoption of the best quality components
. Economic & Quick Installation
- By immediately available single packaging design integrated with after cooler
- BY adopting horizontal split type gear case, bearings, and air & oil seals
- Convenient and speedy maintenance by the straight type water-in-tube method for inter & after cooler
- Innovatively reduced hours of maintenance by module type design applied for all major components
- Implementing the test of all the components consisting of turbo compressor
- Established strict quality assurance system for compression capability essential for stable operation,
which provides impeccable durability and stability
Standard Equipments
- High efficiency WB series turbo compressors by applying state-of-the-art aerodynamic design
- Air suction filter
- Inter & after cooler / Oil cooler
- Vibration detection sensors per stage
- High efficiency motor
- Automatic drain trap
- PLC type control panel including a 10" wide touch screen display
- Lube system
- Suction control device ( I.G.V )
- Blow-off Valve ( B.O.V ) & Silencer
- Constant pressure control / Anti-surge modulating control
Optional Equipments - Twin oil filter - Motor starter panel - Differential pressure monitoring system for suction filter - Computerized intelligent group control & Remode control - Human machine interfaces system ( HMI System ) - Sound-proof enclosure |
|
Model |
WB 300 ~ 600 |
WB 700 ~ 1120 |
WB 2000 |
WB 3000 | |
Suction flow |
m3/hr |
2,300 ~ 5,200 |
5,300 ~ 13,000 |
13,000 ~ 20,000 |
21,000 ~ 30,000 |
Pressure |
kg/cm2.g |
3 ~ 25 | |||
Motor |
kw |
130 ~ 2,700 | |||
Dimension ( mm ) |
Length |
3,200 |
3,800 |
5,000 |
5,500 |
Width |
2,200 |
2,200 |
2,600 |
3,000 | |
Height |
1,800 |
2,500 |
2,600 |
3,500 | |
Weight |
kg |
6,000 ~ 7,500 |
8,000 ~ 12,000 |
20,000 ~ 22,000 |
24,000 ~ 28,000 |
※ Be careful that above specification can be changeable at any time without any prior notice
in order to to upgrade the quality and performance of the products.
The principle of compressed air for turbo compressor
During the air compression, inlet air from inlet port is filtered through suction filter, the suction rate of air is
controlled by I.G.V(inlet guide vane) and then, it is supplied into first stage compression part.
The principle of compressed air is that the centrifugal force to rotate impeller at high speed accelerates the air
and then, fixed diffuser is changed to pressure.
The R.P.M(revolutions per minute) of impeller is greatly increased by utilizing the difference of gear ratio between
bull gear and pinion gear of the R.P.M of main motor.
Compressed air to be increased to about 2 bar at 1st stage is cooled through inter cooler at first stage and then,
is supplied into compression part at second stage.
Cooled air is compressed by second impeller, rotating same speed as first impeller and then, is cooled after
supplied into second inter cooler.
Compressed air to be supplied into third stage compression part is compressed again by impeller and is reached
to optimal design condition through after cooler.
Compressed air to be reached to the finally required pressure condition is supplied into each air receiver tank
through D.C.V(discharge check valve) in order to protect the reversal of compressed air in the turbo compressor.
Product | WB Series Turbo compressor |
---|---|
Manufacturer | Self-production |
Country of Origin | Republic of Korea |
Retail Price | $1.00 |
Price | $1.00 |
Product Code | P000000U |
수량 | |
Trend | Basic trend |
Domestic / International Shipping | oversea delivery |
Shipping (Charge) | International Shipping Fee |
Payment for Shipping | Parcel Service |