AfterCooler
SEAH INDUSRTRY
Air Cooled Type
|
It is well known that hot and moisturized air coming from an air compressor usually causes malfunction
and damage to application equipment, disrupting production and affecting quality.
After cooler is essential cooling assist device to cool high tempeture and humid compressor air firstly
and then, stabilize the compresser air into free air tempeture status.
After cooler of air cooling type provided by SeAH is that cooling air cuts across a heat exchanger and
the steam in the compressor air a course of cooling becomes to the water and then, is eliminated by
separator and filter.
When wishing to reduce the aforementioned side-effects, after coolers are an indispensable auxiliary to
compressor air equipment, simply by assisting stable capability by reducing the moisture and temperature
of the air passing through.
- Air cooled type aftercooler saves installation, repair and maintenance cost, even when used in
colder seasons of climates.
- The fan motor's operational performance can be easily viewed on the grapic control panel.
- Differential pressure of heat-exchanger is minimised by multi-circuit design.
- Quieter design better suits some quiet workshop envrionments
- Special coating allowing for outdoor installation
- Economical and elegant compact design.
Model
|
SCA 20 |
SCA 25 |
SCA 40 |
SCA 50 |
SCA 65 |
SCA 80 |
SCA 100 |
SCA 150 |
SCA 200 |
SCA 300 |
SCA 400 |
SCA 500 | |
Capacity (Nm3/min) |
1.0 |
3.2 |
5.1 |
7.8 |
10.0 |
11.0 |
15.0 |
28.0 |
41.0 |
52.0 |
65.0 |
75.0 | |
Connection pipe -diameter (in/out) |
20 A Socket |
25 A Socket |
40 A Socket |
50 A Socket |
50 A Socket |
65 A Socket |
80 A Socket |
100 A Flange |
100 A Flange |
100 A Flange |
125 A Flange |
125 A Flange | |
Current (Ampere) |
0.36 |
0.56 |
1.35 |
2.30 |
1.8/1.1 |
2.0/1.1 |
2.5/2.0 |
4.0/3.0 |
5.5/3.2 |
6.0/3.5 |
8.0/4.0 |
8.5/5.0 | |
Power consumption (w) |
16 |
100 |
200 |
200 |
400 |
200 x 2 |
300 x 2 |
500 x 2 |
600 x 2 |
650 x 2 |
750 x 2 |
1,500x2 | |
Fan diameter (mm) |
250 |
350 |
450 |
500 |
600 |
400 x 2 |
450 x 2 |
500 x 2 |
600 x 2 |
650 x 2 |
700 x 2 |
750 x 2 | |
Dimension (mm) |
Length |
460 |
590 |
780 |
880 |
1,031 |
470 |
470 |
560 |
564 |
650 |
700 |
750 |
Width |
275 |
275 |
250 |
360 |
419 |
1,293 |
1,495 |
1,834 |
1,834 |
2,160 |
2,255 |
2,360 | |
Height |
470 |
600 |
665 |
740 |
902 |
890 |
1,010 |
1,105 |
1,253 |
1,416 |
1,563 |
1,763 | |
Weight (kg) |
16 |
24 |
48 |
58 |
76 |
80 |
100 |
150 |
200 |
300 |
350 |
500 |
※ Electric source : 220V/380V/440V, 1PH, 60Hz (50Hz) ; SCA 20, SCA 25
220V/380V/440V, 3PH, 60Hz (50Hz) ; SCA 40 ~ SCA 500
※ Inlet max. temperature : Max. 80 ℃
※ Ambient temperature : Max. 45 ℃
※ Max. pressure : 14 kgf/cm2
※ Be careful that above specification can be changeable at any time without any prior notice
in order to to upgrade the quality and performance of the products.